The beginnings of the remote control car can be traced back to the 1940s, when small, nitromethane-powered engines first entered the market. At the time, the only way to control an engine-powered model car was with a tether. While these cars were fast, they merely ran in a circle from the tether. In the late 1960s, the first miniaturized solid state radio control systems were introduced, allowing model cars to have servo-controlled steering, throttle, and brake functionality that could be remotely controlled from a transmitter unit.
Several early commercially viable remote control cars became available by 1966, produced by El-Gi (Elettronica Giocattoli), a company from Reggio Emilia, Italy. Their first remote control car model was a 1:12 Ferrari 250LM. This was followed by their 1:10 Ferrari P4 model, which was first shown at the Milan Toy Fair in early 1968. Between the mid to late 1960s, a British company called Mardave also began to produce commercially viable remote control cars. Their first products were nitro- or gas-powered cars which were sold in the early 1970s.
During that period, several commercial products were manufactured by small firms in the United States. Most of these companies started out as slot car companies, then moved into the remote control car field, which was becoming more popular. Early kits were 1/8 scale nitro-powered aluminum flat pan cars powered by a .21 or smaller engine, with the bodies made of polycarbonate.
In 1976, the Japanese firm Tamiya released a series of highly detailed but mechanically simple electric on-road car models. Although more expensive, these kits and radio systems sold quickly. Soon, Tamiya began to produce more purpose-built remote-controlled model cars, and were the first to release off-road buggies with real suspension systems. This allowed remote control cars to be driven virtually anywhere, not just on bitumen and smooth surfaces. It was this development toward the off-road class that brought about much of the hobby’s popularity.
Watch the video related to remote control car
This is one of the best video done on Remote Control Car Drifting in Singapore. Done by the team from SGDRIFTERS
Help answer the question about remote control car
Is there a way to control an remote control car from a far away place with the remote attached to a computer?I have a remote control car that I like. I have to leave state to go to my dad's house but I don't think airport security will let it through. I'm wondering if i can hook up my remote to my computer so i can control it over the internet, and if your wondering it has a camera and some other things on it so I'll be able to see it.
About Author
Riz Davis, 26, is the Internet Marketing Associate of Gadget Epoint LTD. Being internet savvy and geek at heart, she enjoys surfing the net for unusual gadgets and novelty items just for fun. And it sure does help that she gets to do what she loves most through her profession
wow, the bird in the backround must be going M-10. CHEESE!!!!!!!!!!!!!
i would be scared to be the guy that starts it up
fake at the end,u can c it because everything else speeds up as well.Including the 200mph birds in the background
Get a life!! This has to be the worst hobby anyone can think of. Why don’t you get someone to jump-rope as the car (thing) goes round. That wuld be entertaining to watch somebody jump like a GD fool!
Oooook. Short answer, is you can't. Long answer is; Each remote car, and remote car radio handset has a crystal in it. The crystal in the remote car, and the handset it came with are identical, producing the same frequency and running your car. However, the cheap remote car radio handset your purchased has a very slightly different crystal, it is still 49mhz, but it may be 49.174 while the one you had before was 49.566. Basically this means that you wont be able to get control of the car with a different handset. However, hobby grade cars have the crystals visibly on the outside of the radio handset. IF this is the case, you can remove the crystal from the handset, and switch it with another. Same with the car, IF ITS HOBBYGRADE you can take the top of, the crystal will be poking out of a small black box, the reciever. IF this is the case, you can swap the crystals around. However if what you've got is two toys cars, im sorry to say it, your stuffed. If you need more info, see http://en.wikipedia.org/wiki/Remote_control_car#Toy-grade_radio_control
Unless you are "allowed" to build your own RC remote/receiver, hacking an existing RC remote will be a pain in the butt. Of course if you are allowed to build from the ground up, you have tons of options.
http://www.epanorama.net/wwwboard/messages/3583.html
that was light speed or i have bad seeing
you can see the wings on the “flies” around 0:56 the light under the flag starts to blink really fast too, but who knows.
200 MPH eh? Goes well with the 200 MPH birds flying in the background.
With a very good sense of imagination..
oh my fucking god its smokeing
If it was just an electric toy car, you would increase the voltage the motor is getting and it would go faster. But being remote control, it has some electronics in it that could be damaged by higher voltage.
But there is always a way. Do you know much about electronics? You need to wire in a relay between the motor and the control box. You wire it so that the control box doesn't send power to the motor any more, it just sends a little power to the relay to "trip" it (a relay is just a switch that it turned on by electricity – you can get one at Radio Shack).
Say your car runs on 6 volts. You would hook up some batteries with say, 12 volts, and connect one of the wires to the relay, the other wire to the motor, and then run a wire from the relay to the other motor wire. Now, when you press the button on the remote to make it go, the controller in the car will turn on the relay. The relay will connect the 12-volt power to the motor, and off it goes, twice as fast as before.
You might even consider running it at 18 volts. To do this, get 4 or 6 rechargeable 9-volt batteries. Connect them in series pairs – two batteries to make 18 volts, then two more in series, with this series connected in parallel to the first. The more batteries you have in series, the faster it will go. The more you have in parallel, the longer it will run.
Hope this helps!
Rick (engineer)
OMG!!!!!
first if it has a a starter than put batteries in it
then put the nitro in the vehicle
then try starting it with the starter
(if problem persistce than wiggle the exauhst pipe until exauhst is moving out freely)
if this still does not help than im sorry i cant help
Go to a prof. hobbies shop, if they don't have the whole kit they should have the control transmitter and receivers you need.